If you need to contact me you can Email me at decals@hotmail.co.uk

Fitting instructions:
(please read fully before installation and watch a few youtube installation videos)
The guitar headstock must be sealed with clear gloss. 
I use carplan clear lacquer which is an acrylic spray.
The decal will not stick to bare wood. The headstock should be smooth/flat with
no bumps.
Soak your decal in warm water for 20 - 40 seconds. (Not too long)
At this point the decal may curl don’t worry.
Put a drop of water on the headstock in the area you'll be applying the decal 
so that you can move the decal freely if needed. 
You should be able to slide the decal off the backing quite easily.
Slide it directly onto the headstock. 
At this point the decal is very fragile. Be careful not to crease it or rip it and try 
not to handle the printed area much as it may damage the image.
Pat dry lightly with a damp cloth, "Don't rub" just be gentle.
Let it dry.
*Once dry you must seal the decal with more clear gloss to protect it.*

YouTube has some great videos of how this is all done.

Here is a good one.
http://www.youtube.com/watch?v=_3apOWtTINA

Don’t forget it won’t stick to bare wood and make sure you seal it to the head with 
more clear gloss once it’s done to protect it.